Muratec MT 200

Ny/Begagnad: Ny
Kategori: Multioperationsmaskin
Fleroperationsmaskiner
Industrimaskiner

Referensnr: 4836
Upplagd: 2025-02-20
Ludwig Larsson
0164005058

Beskrivning

MURATEC CNC LATHE MT200 T2 L-749
Hainbuch Hylschuck TOPlus combi pullback 65 A2-6 (up to 65 mm) including draw pipe adapter,
Kitagawa BR208 3-jaw chuck including adapter, hardened jaws, soft jaws.
Short bar magazine LNS Servo 105 including 3 pushers.
Tool package WTO / LNS.
WORKING AREA
Max swing diameter mm 205 (228 with 12-station turret)
Max distance between spindle noses mm 1170
Chuck diameter Ø mm 210
Max bar diameter Ø mm 65
Max workpiece length mm 770
SPINDLE (applicable to both main spindle and sub spindle)
Max spindle speed rpm 4000
Spindle nose JIS A2-6
Drilling Ø mm 77
Spindle bearing diameter Ø mm 110
Spindle motor power kW 15 / 11
AXES
Upper turret X / Z / Y mm 220 / 770 / 80 (+- 40)
Lower turret X / Z / Y mm 200 / 770 / 80 (+- 40)
Right spindle Zs mm 880
Rapid traverse X / Z / Y / Zs m/min 24 / 36 / 12 / 36
TOOL TURRET
Number of tool positions (all driven) 15 + 12
Tool section 20 x 20
Tool section Ø mm 40
Max power for driven tools kW 14.0 (4.8 kW continuous)
Max speed for driven tools rpm 4500
Max tool shank for driven tools Ø mm 16
OTHER
Coolant tank L 380
Hydraulic oil tank L 20
Grease cartridge L 0.7
Coolant pump Bar 3 (option 20 bar)
Power requirement KVA 54
Machine required floor space mm 3550 x 2100 (without chip conveyor)
Net weight std kg 9000 (without coolant tank)
PART CATCHER (with claw and conveyor, option) (only for spindle 2)
Workpiece capacity mm Ø65 x 160 (2.5 kg per part)
REMNANT HANDLING (bucket and box, option) (only for spindle 1)
Remnant capacity mm Ø65 x 100 mm
STANDARD EQUIPMENT:
2 tool turrets with 15 stations upper, 12 stations lower, all positions driven (max 14 kW)
Automatic reference point return for turrets
Y-axis for both turrets
MPG handwheel (0.001mm, 0.01mm, 0.1mm)
Nozzles for coolant and air blowing over both chucks
Foot pedals for chuck operation (open/close), one for each side
Coolant equipment with tank and pump with 3 bar pressure for both sides
LED lighting x 2
Full protective cover
Operator manual
MACHINE PRICE (including the options below):
OPTIONS:
Automatic power off via timer (auto power off) Included
Tool monitoring for both turrets, controlled by torque (tool monitor software) Included
Part ejection detection (via torque sensing for Z2 axis) Included
Signal tower (red / green / yellow) Included
Part catcher (with claw) and part conveyor for spindle 2 Included
Multi-position spindle stop orientation for both sides Included
Through spindle flushing (only spindle #2) Included
Sensor for confirming chuck closure via cylinder stroke length (both spindles) Included
Chip conveyor (slat type) Included
Prepared for oil mist separator (Ø 150 mm) Included
Tool setter for automatic tool measurement (via manual arm, both sides) Included
RS-232C interface included
20 bar high-pressure flushing for both sides (instead of standard 3 bar) Included
Separate coolant tank Included
2 coolant level switches (one for main tank, one for separate tank) Included
Remnant handling (bucket and box) for spindle 1 Included
Dual coolant filters for both sides (4 total) with switch so filters can be cleaned without interruption
Included
Tool offset measurement value direct input B Included
Direct Drawing Dimension programming Included
Hydraulic cylinders VNK150/67 for both spindles for 65 bar (not chucks) Included
Interface for bar feeder Included
Fanuc / Muratec control system
Dual spindles with 4000 rpm, 15 kW
C-axis for both main and sub spindles
Tool station index counter (CRT display, 6 digits, including alarm function)
Part counter, total counter (CRT display, 8 digits)

Pris: Ej angivet

Finansiering

Allmänt

FabrikatMuratec
Tillverkningsår2022

Skicka intresseanmälan

Mottagare
Mekpoint AB, Ludwig Larsson
Ämne
Meddelande

Avsändare

Företagsnamn
Namn
Epost
Telefon
Genom att du klickar "Skicka meddelande" godkänner du att vi sparar dina personuppgifter enligt aktuella villkor
Vill du ta emot e-postutskick ifrån industritorget?
Skicka en kopia av meddelandet till mig.

Kontaktinformation

Postadress
Björks­gatan 12
63221 Eskilstuna
Besöksadress
Abramsons Väg 2
63180 Eskilstuna
Region
Eskilstuna
Södermanlands län
Sverige
Organisationsnummer:
556863-1542
Grundat: 2011
Anställda: 9
Köper & säljer begagnade maskiner.
Vi utför även maskinflytt, reparationer & transporter

arrow_downwardSe nedan för mer information om vår verksamhet.

Kontakter

Ludwig Larsson
0164005058
call